http://www.rollershutters.com.au/ "Keeping you cool, keeping you
warm, keeping you safe"





View Bob Lamb's profile on LinkedIn

OZRoll's Aluminium range of Slat Profiles.

The AR4OO series slat profile used with our Domestic range.

AR400 perforated slatThe AR400 is used in our Domestic range, and is coated before forming, which ensures all metal surfaces are protected from corrosion. The shape of the profile has been designed specifically to suit the domestic roller shutter market along with many commercial applications. The slat is roll formed in our Adelaide manufacturing facility to the highest of world standards. The German built roll forming machine is the most advanced of its type in Australia today.

The slats that make up the curtain in the Domestic, Cyclone and Light Commercial Roller Shutters are perforated. The top of the slat has an 8mm hook hinge which attaches to the bottom of the next slat. When the curtain is being raised the slats have a 4mm gap, this gap then allows the curtain to be wound tightly around the round axle. In this gap you will see the perforations which are 15mm x 2mm and are spaced every 15mm. The curtain can be stopped before it is fully extended this gives you the option of being able to see through the curtains perforations and allowing air flow, but when fully closed no light will penetrate.

These perforations are not on our Security Roller Shutters, the Security is an extruded slat profile ideal for commercial use or where added strength and security is required. The profile itself has a hollow section and is available in a 40mm curved slat.

Technical Specifications.

Cover size 40mm
Slat width8.7mm
Slat thickness.36mm
Weight per square meter4.0 kg / m2
Maximum overall size of shutter7.7 m2
Maximum width of shutter3.6mm
Maximum height of shutter 3.0mm

Mechanical Properties: The AR4OO series slat is a double walled cavity, curved 4Omm profile with PU foam injected during the roll forming process. This process provides economical strength and insulation qualities while maintaining exceptional working performance of the slat. The curved shape of the slat provides minimal roll sizes and optimal lateral strength.

Environmentally safe “Green” foam: OZRoll is both pleased and proud to announce that we are now using a more 'Green Friendly' polyurethane foam that is both CFC (Chloroflurocarbon) and HCFC (Hydrochloroflurocarbon) free.
All foams expand with the aid of a 'blowing' agent, however what is not commonly known is that most foams used in Australia contain a blowing agent which has an Ozone Depleting Potential (ODP). Green Foam OZRoll are now leading the way by offering non - ODP foam.
The new 'Green' foam actually uses water as the blowing agent, rather than the harmful CFC and HCFC which has proven to have a damaging affect on the environment.
The foam has been tailor made to meet the production requirements of our plant and is a classic example of working together with our supplier to make a world class and environmentally safe product.

 

AR400 HDF "High Density Foam" Cyclone slat profile

The AR4OO HDF series slat

AR400-HDF perforated slat

The AR400 HDF is used in our Cyclone range. It is this remarkable increase in density that offers the HDF product such remarkable characteristics. The slat inserts are actually screwed into the foam rather then being stapled as per the standard slats. The ability to screw into the foam offers the extremely remarkable strength
The two part polyurethane chemicals are mixed together at the very last moment before being injected into the open slat section. Once the chemical is mixed a chemical reaction begins instantaneously and the foam begins to transform from a liquid to a solid
The chemical reaction generates heat and in some cases the slat profile will be over 90c at the end of the roll-former.

Slat Inserts Each insert is securely fastened using two 25mm long screws pilot drilled and fixed directly into the High Density Foam. This design incorporated the benefits of the High Density Foam, specially designed restrained slat inserts. These inserts are designed to integrate with the guide section and actually form a positive and structural connection with the guide. The outside wall thickness is actually thicker than the backside. This is to compensate for the offset design of the restrained insert and the fact that in most cases the forces are in the outward direction. We have designed in a small 'v' groove on the face of the guide that should always be facing the outside of the shutter.

Technical Specifications.

Cover size 40mm
Slat width 8.7mm
Weight per square meter 6.0 kg / m2
Maximum overall size of shutter 7.2 m2
Maximum width of shutter 3.6mm
Maximum height of shutter 3.8mm

 

"Cyclone Rated" The OZRoll Super Shutter, incorporating the AR400 HDF slat, restrained slat insert and heavy-duty guides underwent cyclone tests at the Cyclone Testing Station, School of Engineering, James Cook University, Townsville, Queensland. The test involves fitting the Super Shutter (using on wall installation techniques) to an Air box facility, which can then simulate the enormous loads that can be encountered under tropical cyclone conditions.

 

AE401 Extruded Aluminium Slat Profile

Bushfire Rated to BAL 40

AE401 extruded slat

The AE401 displays superior strength over other standard slat profiles with regard to bending and flexing. This strength allows high performance roller shutters to be created for both domestic and commercial applications requiring more window security than our standard slat profile can offer.

The shape of the profile has been designed specifically to suit the security roller shutter market. As the slats flex even less than our regular profile, a potential burglar would not be able to change the shape of the slat, removing the risk completely of something going between the slats.

The AE401 series Extruded Aluminium Roller Shutter is manufactured with no tolerance for error and extruded using state of the art extruding equipment, all complying to the toughest international standards.

Technical Specifications.

Cover size40mm
Slat width9mm
Aluminium width1.0mm
  
Weight per square meter8.0 kg / m2
Maximum width4 m
Maximum width with extended guides4.6 m
Maximum installed area12 m2

Bushfire Rated to BAL 40: OZRoll Industries has recently had their AE401 series Extruded Aluminium Roller Shutter Slat tested by the CSIRO for compliance with Clause 14.4 Bushfire Radiant Heat and Ember Attack, of the Australian Building Code AS1530.8.1-2007.
The CSIRO determined the AE401 series Extruded Aluminium Roller Shutter Slat to be compliant with protection against Australian Standards AS3959 Bushfire Attack Level (BAL) 40 risks.
When combined with other house modifications, these are the only slats capable of reducing the risk associated with living in a BAL-40 or BAL-FZ (Flame Zone) area, the most intense threat a home can face from bushfire.

 

Aluminium Light Commercial Roller Shutter Slat Profile

AR551 Slat Profile

AR551 slat


This series slat has the largest prolife of all our slat range, it's is roll formed with a double walled cavity injected PU foam, with a slight curved 55mm profile, but remarkably it's the lightest in weight.

The image of the AR551 slat on the left, has a white outlined image of the other slats, (described above) this shows a comparison in size between the other range of slats.

This was designed to be used for large areas where weight could be an issue, this shutters curtain weight is less than half the weight of the AE401 slat, for a comparison in weight,  if you had a window two story up with a size of 3400mm x 2400mm which would equal to 8.16 square meter the weight of the AE401 slat would be over 65Kg. compared to just over 27Kg.

 

Technical Specifications.

Cover size 54.63mm
Slat width 11.6mm
Weight per square meter 3.4 kg / m2
Maximum width 4200mm
Maximum height 3100mm
Maximum installed area 11.8 m2

 

Performance: The AR4OO, AR400 HDF, AR551 and the AE401 series slats profiles are expected to perform satisfactorily 20 years in normal climatic conditions, and when fitted under the specifications listed. During this period, normal weathering of the coating is expected with a reduction in gloss and a gradual uniform colour change over the lifetime of the coating. The coating of the slat profiles carries a nominal 5-year warranty against fading due to normal weathering conditions.