http://www.rollershutters.com.au/ "Keeping you cool, keeping you
warm, keeping you safe"





View Bob Lamb's profile on LinkedIn

Frequently Asked Questions


T06,T20 and T35 Low Voltage Tubular Motor

 

The T06 Tubular Battery Motor

T06 battery motor

The T06 is a slimmer design with power equivalent to 6nm, providing a lifting capacity of approximately 13kg. The motor has been designed to be used with the E-Port Controller and the old style ODS Control 10
The T06 has already proved its popularity in the European market following an early release of the product out of Ozroll’s offices in Frankfurt, Germany and we expect it to have the same impact on the Australian Market.
T06 - adjustment required

 

*T06 ODS Maximum Lifting Capacity of 13kg*
Curtain weight: 1sq mtr = 4kg = 3.2 square meter of shutter (for example, 1.625mm x 1.625mm window maximum) or any other combination that equals 3.25 square metres or less.

 

The T20 Tubular Battery Motor

T20

 

The T20 tubular motor has been specifically designed to suit the current Ozroll Drive System (ODS) operating systems and is completely compatible with both our Standard and RF controllers.

With a lifting capacity equal to 20Nm and the ability to fit into a smaller head box (150mm head box) the T20 tubular motor has double the capacity of our existing L10 mech with all the benefits of a low voltage system.
A Smarter and Safer alternative that will still function during a power blackout and does not require the services of an electrician.

Installation is quick and simple and the T20 has mechanical limit settings with a nominal speed of 16RPM.
Drive Wheel Kits are available to suit both the 50mm round and 60mm Octagonal axles.

Battery operated roller shutters over 4 square meters and under 8 square meters in area are fitted with the
*T20* battery motor, this motor requires adjustment, the up and down limits need to be set.
T20 - adjustment required

 

*T20 ODS Maximum Lifting Capacity of 32kg*
Curtain weight: 1sq mtr = 4kg = 8square meter of shutter (for example, 3200mm x 2500mm window maximum) or any other combination that equals 8 square metres or less.

 

Domestic roller shutters larger than 8 square require an electric motor.
Electric-Powered Domestic Roller Shutter

 

T20 $215.00 each inc. GST & Postage & Handling

Drive Wheel Kits $14.00 each inc. GST & Postage & Handling

Buy Now

If you are not confident about installing this product don't order this product.

This product is non-refundable unless the product is faulty

 

T35 Low Voltage Tubular Motor

T35

 

We are pleased to introduce the T35 DC Tubular Motor to our existing range of 12V DC motors with both our Standard and RF controllers.

The T35 offers power equivalent to 35nm which is capable of lifting a roller shutter up to 52kg in weight making it ideal for use with our Security Roller Shutter, BAL 40 rated slat. It has been designed to be used with either the E-Port Controller
A Smarter and Safer alternative that will still function during a power blackout and does not require the services of an electrician.
*T35* and the *T20* battery motors, these motors requires adjustment, the up and down limits need to be set.
T35 and T20 - adjustment required

 

*T35 ODS Maximum Lifting Capacity of 52kg*
Domestic slat weight: 1sq mtr = 4kg.
This motor will operate our complete range of Domestic roller shutters.
Commercial slat weight: 1sq mtr = 3.4kg.
This motor will operate our complete range of Commercial roller shutters.
Cyclone slat weight: 1sq mtr = 6kg.
This motor will operate our complete range of Cyclone roller shutters.
Security weight: 1sq mtr = 8kg.
This motor can only be used upto 6.5 square meters with the Security roller shutters, if your require larger than 6.5 square you will require an electric motor.
Electric-Powered Domestic Roller Shutter

 

T35 $275.00 each inc. GST & Postage & Handling

Drive Wheel Kits $14.00 each inc. GST & Postage & Handling

Buy Now

If you are not confident about installing this product don't order this product.

This product is non-refundable unless the product is faulty

 

Return to Quick Info