http://www.rollershutters.com.au/ "Keeping you cool, keeping you
warm, keeping you safe"





View Bob Lamb's profile on LinkedIn

Available Colours for our complete range of Slats.


Domestic Cyclone Security Light Commercial
Brown      
Green      
Red      
Beige      
Grey      
Sand Sand Sand Sand
Cream Cream Cream Cream
White White White White
Woodland Grey   Woodland Grey  
Deep Ocean Blue   Deep Ocean Blue  
Black      
    Mill Finish  
    Clear Anodized  

Available Colours for the Head Box, Guides and Bottom Bar.


Domestic Cyclone Security Light Commercial
Brown Brown Brown  
Sand Sand Sand Sand
Cream Cream Cream Cream
White White White White
Woodland Grey Woodland Grey Woodland Grey Woodland Grey
Deep Ocean Blue Deep Ocean Blue Deep Ocean Blue Deep Ocean Blue
Black Black Black  

 

Colours that our roller shutters come in

The head box, guides and bottom bar colours are: White, Cream, Sand, Brown, Woodland Grey, Deep Ocean Blue, and Black.

The Colours shown are the best available digital match. There may be a slight variation in actual colour. 

Please note: The Brown slat (Jasper) is not a close match to the Brown Head Box, Guides and Bottom bar, this is a darker Brown than the slat.

Please note: The Black, Deep Ocean Blue, and Woodland Grey head box is unavailable in the 150mm size.

Custom powder coating is only available for the Head Box, Guides, and bottom bar, $160.00
The powder coating process will extend the delivery time by 14 day.
Please note: The rivets, and the guide hole caps, will not powder coated, you will need to colour match those parts.

Coloured Stripes

Stripe patterns are available using our existing colours. Please keep in mind that the stripe pattern you see on the out side of your home, is the same as you will see from inside your home. The slats are the same colour both sides.

From the picture below you will be able to find the slat numbers that you want to be a deferent colour, just measure up from your window sill to the desired height's of you pattern, and find the slat number required for the pattern. Please. Email this information to use when you place your order.

strip colours

Custom Box and Guides powder coating is available $160 per shutter.
The powder coating process will extend the delivery time by 14 day.
Please note: The rivets, and the guide hole caps, will not powder coated, you will need to colour match those parts.

The domestic roller shutter slat can not be powder coated.
Our security roller shutter uses a hollow extruded slat, that can be powder coated, but it is about 30 % more expensive than the domestic shutter, plus the cost of the powder coating.

For more information powder coating security roller shutter

 

Coating: Slats

The base material has a two-coat system of primer plus topcoat, which is based on a polyurethane/polyamide binder. The polyester is cross-linked with melamine or blocked isocyanate resins and modified with Polyamide to provide the high resistance to abrasion.

 

Coating: Guides

Introducing the Dura Coat 5000 Series of architectural coatings. This system has been designed as a one-coat finish for extruded aluminium using electrostatic spray application. The Dura Coat DC5OOO-CX system is exclusive to our product in the roller shutter industry and carries a fifteen (15) year guarantee against fading.

 

Coating: Head Box

The base material has a two-coat system of primer plus topcoat, which is based on binders of polyester and melamine.
Type: Modified Polyester
Pre Treatment: Hot sulphuric acid with alternating current, anodizing a coating thickness of max.0.10 microns of aluminium oxide.
Primer: Specially formulated flexible primer with a nominal film thickness of 5 microns
Top Coat: Polyester with a nominal thickness of 20 micr