OZRoll Roller Shutter Parts
Roller shutters sold through our web site are fully operational and require no extra parts to operate.
In this section of the web site you can purchase upgrade components, and purchase replacement parts.
E-Port Controller
The E-Port controller is supplied with each battery roller shutter, included in the price.
A new E-Series replacement battery controller costs $125 each Inc. GST & Postage & Handling.
OZRoll Drive System (ODS) New E-Series
Upgrade old L10 controller to E-Port
E-Port RF Controller
When purchasing a new roller shutter you can upgrade to the E-Port RF controller for $40.00
A new E-Series RF replacement battery controller costs $145 each Inc. GST & Postage & Handling.
Replacement Controller E-Series RF
E-Trans Remote: 1 Channel and 9 Channel
The E-Trans RF Remote will provide wireless control of the E-Port RF systems and is offered in two versions 1 Channel and 9 Channel.
Controller Upgrade to RF
E-Trans RF Remote
1 Channel E- Trans RF remote $69.00
9 Channel E- Trans RF remote $82.00
Postage and Handling for the E-Trans is $15.00 when sold separately.
E-3Way Switch suitable for bay windows
The E-3Way switch allows three battery powered roller shutters to be operated separately by only one E-Port controller. The E-3Way receives the power delivered from the E-Port controller and relays it to one of three shutters. This makes it a convenient and cost effective option for operating multiple shutters within a close proximity, such as bay or box windows. This switch will only operate one shutter at a time.
E-3Way Switch costs $68.00. Postage and Handling $15.00.
E-3Way Switch Instructions PDF.
E-Port Charger
The E-Port Charger is supplies with each battery roller shutter, included in the price.
A new battery Charger costs $12.50. Postage and Handling for the Charger is $15.00.
This charger will also charge the old L10 controller.
The newer technology of the Lithium-Ion batteries.
E-Solar Charger
This product is recommended to be used with the RF installation as it draw more power with the RF always on.
E-Solar 2w solar charging panel $62.00
Postage and Handling for the Charger is $15.00 when sold separately.
E-Solar Panel Installation Instructions
E-Port Wall Plate
The E-Port Wall Plate is supplies with each battery roller shutter, included in the price.
Replacement wall plate $8.50.Postage and Handling for the Wall Plate is $15.00
OZRoll Drive System (ODS) New E-Series
E-Port Wall plate Conversion Kit
This conversion kit uses the existing fixing points that secured the old L10 wall plate.
With this new conversion kit fixed to the wall, you can now fix the E-Port wall plate (that is supplied) to this, this will allow you to use the new E-Port controller.
E-Port Wall plate Conversion Kit $16.50.Postage and Handling for the Wall Plate is $15.00
Old style controller: L10 Battery Replacement Kit
We can still supply L 10 battery replacement kit.
A new L 10 battery replacement kit costs $65.00 each Inc. GST and Postage and Handling.
It should be noted that the battery is not always the cause of the controller not working, and therefore it is recommend that where possible a 'New E-Port Controller and wall plate' is ordered. This product is non-refundable unless the product is faulty
Old style L10 Replacement Controller
Discontinued
The new replacement controller that replaces the old L10 controller is the E-Port controller with the
Lithium-Ion batteries, you would also require the E-Port wall plate OR the
E-Port Wall plate Conversion Kit, which is supplied with the E-port wall plate.
The new E-Port wall plate is smaller than your existing L10 wall plate, which
will not cover both old fixing points, unless you use the Wall plate Conversion Kit.
Your existing L10 charger will also charge the E-Port controller.
New L10 Mech Battery Motor
The next generation of the ODS Mech will now replace the existing mechanism.
L10 Mech replacement battery motor $145.00 each Inc. GST and Postage and Handling.
Axle Adaptor $14.00 each Inc. GST and Postage and Handling.
Please send us an email with the Axle Adaptor's size and shape.
*L10 Mech Maximum Lifting Capacity of 16kg*
Curtain weight: 1sq mtr = 4kg = 4square meter of shutter (for example, 2000mm x 2000mm window maximum) or any other combination that equals 4 square meters or less.
T20 Battery Replacement Motor
Battery operated roller shutters over 4 square meters and under 8 square meters in area are fitted with the *T20* battery motor
The new T20 Battery Replacement Motor cost $190.00 each.
$25.00 Postage & Handling
Drive Wheel Kit if required $14.00 each Inc. GST and Postage and Handling.
Please send us an email If you require a Drive Wheel Kit.
T20 Battery Motor How to install PDF
*T20 ODS Maximum Lifting Capacity of 32kg*
Curtain weight: 1sq mtr = 4kg = 8square meter of shutter (for example, 3200mm x 2500mm
window maximum) or any other combination that equals 8 square meters or less.
T35 Battery Replacement Motor
*T35 ODS Maximum Lifting Capacity of 52kg*
Domestic slat weight: 1sq mtr = 4kg.
This motor will operate our complete range of Domestic roller shutters.
Commercial slat weight: 1sq mtr = 3.4kg.
This motor will operate our complete range of Commercial roller shutters.
Cyclone slat weight: 1sq mtr = 6kg.
This motor will operate our complete range of Cyclone roller shutters.
Security weight: 1sq mtr = 8kg.
This motor can only be used up to 6.5 square meters with the Security roller shutters,
if your require larger than 6.5 square you will require an electric motor.
The new T35 Battery Replacement Motor cost $250.00 each. $25.00 Postage & Handling
Drive Wheel Kit if required $14.00 each Inc. GST and Postage and Handling.
Please send us an email If you require a Drive Wheel Kit.
Somfy electric motors & components
The SOMFY motor comes with a 5 year warranty.
The standard Somfy Electric Motor is supplied with each Electric roller shutter, included in the price.
There are 4 different size Somfy Electric Motors
Replacement Somfy Motor Pricing
Upgrade the standard Somfy motor to the RTS Somfy motor $145.00
Wireless Control: SOMFY RTS Motor
To order the Upgrade RTS Somfy electric motor please send an
email as soon as you
place your order.
To order a standard Somfy electric motor please email
us with the size (nm) motor you require, and the axle adaptor size, if required.
The Somfy Inis UNO wall switch
The Somfy wall switch is supplied with each electric roller shutter, included in the price.
The Somfy Inis UNO wall switch with up - down and stop function $33.00
Postage and Handling for the switch is $15.00.
The Somfy Inis Duo wall switch
The Somfy wall switch is supplied with each electric roller shutter, included in the price.
The Somfy Inis Duo wall switch with up - down and stop function $48.00
Postage and Handling for the switch is $15.00.
SOMFY Hand Held Remote
The hand held control switch is available in two forms, the single channel and the four channel. Both the hand held control switches will require a "SOMFY RTS Motor" from the Somfy range.
Somfy Hand Held one Channel $110.00 each Inc. GST and Postage and Handling
Somfy Hand Held Four Channel $135.00 each Inc. GST and Postage and Handling
Postage and Handling for the Somfy hand held remotes is $15.00 when sold separately.
Wireless Control: SOMFY RTS Motor and Remote controllers
Manual Control: Components
5 meter Control Strap 14mm
Video: Replace Broken Strap
A new 5 meter Control Strap costs $20.00 each Inc. GST and Postage and Handling.
Suitable for both winders and hand operated strap controls, for the OZRoll roller shutters.
If you are not confident about installing this product don't order this product.
Video: Replace Broken Strap
Multi-Fit Winder with 5m Tape
Multi-Fit Winder with 5m Tape. $36.00 each $15.00 Postage and Handling
Winder Control Crank Handle
Winder Control crank handle.$12.00 each
$15.00 Postage and Handling
PVC Tape-Pulley
The PVC Tape-Pulley is supplied in for sizes that correspond to the head box size.
| PVC Tape-Pulley Pulley Diameter. | Head box Sizes | Sizes
| 120mm | 150mm |
| 140mm | 165mm |
| 160mm | 180mm |
| 170mm | 205mm |
After you order please email us the Pulley Diameter you require.
PVC Tape-Pulley are $4.50 each $15.00 Postage and Handling.
Tape Strap Control.
Tape Strap control, the maximum size for a tape strap control is 1.8 square meters.
Tape Strap control with 5m Tape. $21.00 each
$15.00 Postage and Handling
OZRoll Roller Shutter Components
OZRoll AR 400 Slat
The AR4OO Perforated slat is available in 9 colours. This slat is manufactured in Adelaide by OZRoll
Available colours: White, Cream, Sand, Gray, Beige, Red, Green, Brown and Black
Colour Chart
AR400 Slat $2.60 Lm plus cutting charges.
To order please email us with the length, colour and amount of slats you require, for Postage and Handling charges.
Slat Insert
The AR 400 slat insert are $0.20 each
Ordering 1 or a 100 has a $15.00 Postage and Handling charge.
Standard Guide.
Standard Guide with Wool Pile 53mm $11.00 Lm. plus cutting charges.
The standard guide Colours: White, Cream, Sand, Brown and Black
To purchase the guides please send us an email with the length required and colour, for Postage and Handling charges. Extruded Aluminium Guide
Guide Hole Cap 10mm
Standard guide caps Colours: White, Cream, Sand, Brown and Black
Standard guide caps $0.10 each
Ordering 1 or a 100 has a $15.00 Postage and Handling charge.
After placing your order, immediately send us an email, specifying the colour.
Standard Box End Plate Leg
Standard Box End Plate Leg $2.50 each
Ordering 1 or a 100 has a $15.00 Postage and Handling charge.
Extruded Aluminium Bottom Bar
Extruded Aluminium Bottom Bar $11.00 Lm
Bottom Bar Standard 50mm Colours: White, Cream, Sand, Brown and Black
To purchase the bottom bar please send us an email with the length and colour required for Postage & Handling charges.
V-Type Stopper
V-Type Stopper are $0.55 each
Ordering 1 or a 100 has a $15.00 Postage and Handling charge.
Red axle insert with bearing
The red axle insert with bearing is used to support the axle at the opposite end to the drive mechanism.
To view how this helps support the axle please look at this link Axle Insert
Red axle insert with bearing $7.50 each
$15.00 Postage and Handling charge.
60mm Octagonal Axle Insert with Bearing - HIGH STRENGTH
This is used to support the axle at the opposite end of the axle to the drive system, but with manual hand wind shutters this is used at both ends of the axle.
Octagonal Axle Insert with Bearing $13.50 each
$15.00 Postage and Handling charge.
Insert Roller
The insert roller is used to support the tape from a manual controller roller shutter, that comes from the head box through the wall and down to the winder control
For more information on where this is positioned and how it work please look at this short Video
Insert Roller $4.50 each
$15.00 Postage and Handling charge.
Box End Inserts
The box end inserts our used to help support the curtain from the head box, move down into the guides
These inserts have a left insert, and a right insert, and are supplied as a pair.
Box End Insert are supplied as a pair $4.50 a pair
$15.00 Postage and Handling charge.
Spring Straps: 130mm and 170mm
The spring straps connect the roller shutter's curtain, to the axle, they are produced in two lengths, 130mm which will suit the 150mm and 165mm head box, and 170mm for the 180mm and 205mm head box.
Spring Straps $2.50 each
$15.00 Postage and Handling charge.
After placing your order, immediately send us an email, specifying the
length required, 130mm or 170mm
Please contact us if your postage charges are more than $30.00, we may be able to help.
These product are non-refundable unless the product is faulty.
All Parts sent with Australia Post.
We only supply Australia.