Frequently Asked Questions
Window protrudes out passed the wall
If your window protrudes out passed the wall, you will need to pack the roller shutter out from the wall so it doesn’t interfere with the window frame when you close the shutter
We can supply aluminium angle 24mm x 46mm or 24mm x 76mm the same colour as the guides and head box, this can be fixed to the wall with the angle facing inward, so most of the angle is not seen it will be behind the roller shutter Fix the 24mm side of the angle to the wall, the other side can be riveted to the roller shutter, the guide is 22mm this will give you a 24mm gap from the wall or a 54mm gap from the wall, depending on which size angle you use.
The angle is aluminium and would be the same colour as the head box and guides and come in 3 sizes
24mm x 22mm $6.00 per meter.
24mm x 46mm $8.50 per meter.
24mm x 77mm $11.00 per meter.
To order the angle send an email and request a sill immediately after you place your order
I will then send you a PayPal request for payment.
Window not square for IR installation
The best solution is to install the roller shutter on the wall (OW) and not in the reveal (IR)
If the shutter is to be installed IR, you will need 2 aluminium angles 24mm x 22mm these can be supplied in the same colour as the box and guides. The angle is then fixed to the wall, then fix to the guides, this will take up any gape created by setting the shutter up square in the opening. The shutter must be exactly vertical and horizontal for the shutter to work correctly.
The angle is aluminium and would be the same colour as the head box and guides and come in 3 sizes
24mm x 22mm $6.00 per meter.
24mm x 46mm $8.50 per meter.
24mm x 77mm $11.00 per meter.
To order the angle send an email and request a sill immediately after you place your order
I will then send you a PayPal request for payment.
The best solution is to install the roller shutter on the wall (OW)